Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

You are here: Dyneon Product Catalogue > 3M™ Dyneon™ PTFE > 3M™ Dyneon™ PTFE Paste > PTFE Paste TF 2073Z > PTFE Paste TF 2073Z

3M™ Dyneon™ PTFE Paste TF 2073Z

High molecular weight PTFE Paste, produced by emulsion polymerization.

3M™ Dyneon™ PTFE Paste TF 2073Z is the recommended grade for the manufacture of high quality micro tubing, wire and cable insulation.

PTFE Paste TF 2073Z is a valuable addition to PTFE Paste TF 2072Z for very thin wall, smallest diameter tubing, wire and cable insulation with maximum RR of up to 4400:1.

Product grades with differing extrusion pressure and green strength values. ( PTFE Paste TF 2073Z lower than PTFE Paste TF 2072Z)

Part Number TF 2073Z
Specific Gravity 2.17 g/cm³
Bulk Density 490 g/l
Average Particle Size 400 µm
Reduction Ratio Range 50 - 4400:1
Extrusion Pressure (reduction ratio 1600) 26 MPa
 
 

Help

For tips on searching and how to browse the catalogue go to the help page.