Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

You are here: Dyneon Product Catalogue > 3M™ Dyneon™ Fluoroplastic > 3M™ Dyneon™ PFA > Fluoroplastic PFA 6503PAZ > Fluoroplastic PFA 6503PAZ

3M™ Dyneon™ Fluoroplastic PFA 6503PAZ

3M™ Dyneon™ Fluoroplastic PFA 6503PAZ is a white fluorothermoplastic powder having an average particle size of about 30 μm.

For comprehensive product information download the technical data sheet using the link on the right.

Special Features

  • Good electrostatics
  • Excellent non-stick properties
  • Excellent fluidisation
  • Excellent chemical resistance
  • Good stress-cracking resistance

  • Good surface properties
  • High transparency
  • Heat resistance up to 260 °C
  • High dilelectric strength

Typical Properties

3M™ Dyneon™ Fluoroplastic PFA 6503PAZ powder shows excellent fluidisation and best properties for electrostatic powder coating due to its particle size and distribution.

Typical Applications

3M™ Dyneon™ Fluoroplastic PFA 6503PAZ powder is typically used for electrostatic powder coatings. Due to its small particle size, it is also often beneficial to mix it into other fluoropolymer coatings.
In electrostatic powder coatings maximum layer thicknesses of 25 – 40 μm per layer and about 200 μm total layer thickness can be achieved. In order to improve the adhesion to the metal substrate, it is appropriate to use a primer system. In addition to the known aqueous PAI-based primers Dyneon also offers a powder primer, PFA 7418, to improve adhesion.

View full description Hide full description

Part Number PFA 6503PAZ
Hardness Shore D 60
Physical Form Powder
Melting Point 308 °C
Bulk Density 800 g/l
Melt Flow Index 3 g/10 min
Density 2.15 g/cm³
Mean Particle Size 30 µm
 
 

Help

For tips on searching and how to browse the catalogue go to the help page.