Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

You are here: Dyneon Product Catalogue > 3M™ Dyneon™ Fluoroplastic > 3M™ Dyneon™ ETFE > Fluoroplastic ET 6235Z > Fluoroplastic ET 6235Z

3M™ Dyneon™ Fluoroplastic ET 6235Z

3M™ Dyneon™ Fluoroplastic ET 6235Z is a partially fluorinated copolymer comprising tetrafluoroethylene and ethylene and is belonging to the product class ETFE. It was designed primarily for film extrusion.

For comprehensive product information download the technical data sheet using the link on the right.

Special Features

  • Extremely high weathering and UV stability
  • Wide service temperature range (-200 to +150 °C)
  • Excellent tear and tear propagation resistance
  • Very good non-stick characteristics
  • Good resistance to high-energy radiation

  • High light transmission in the visible and UV-A range
  • Low flammability
  • Excellent mechanical properties
  • Very good resistance to solvents and chemicals
  • Low permeability

Typical Properties

3M™ Dyneon™ Fluoroplastic ET 6235Z is a medium molecular weight grade and features an excellent balance of properties.

Typical Applications

3M™ Dyneon™ Fluoroplastic ET 6235Z is mainly used in film extrusion for final applications in the architectural market and in injection moulding.

View full description Hide full description

Part Number ET 6235Z
Specific Gravity 1.72 g/cm³
Tensile Strength at Break 50 MPa
Elongation at Break 450 %
Dielectric Strength 59 KV/mm
Dielectric Constant 2.58
Light Transmission 93 %
Melting Point 266 °C
Limiting Oxygen Index (LOI) 35 %
Vertical Burn V-0
Refractive Index 1.4
Flame Rating Building Material Class B1 (110 µm film)
Melt Flow Index 10 g/10 min
MIT Folding Endurance 40,000 double folds
Tensile Modulus 1200 MPa
 
 

Help

For tips on searching and how to browse the catalogue go to the help page.