Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All 3M.com Site Map

You are here: Dyneon Product Catalogue > 3M™ Dyneon™ Dispersion > 3M™ Dyneon™ Fluoroplastic Dispersion > Fluoroplastic PFA 6910GZ > Fluoroplastic PFA 6910GZ

3M™ Dyneon™ Fluoroplastic PFA 6910GZ

3M™ Dyneon™ Fluoroplastic PFA 6910GZ is a transparent, water-based fluorothermoplastic polymer dispersion. It has a solids content of around 50 %25. The almost spherical, hydrophobic polymer particles have an average size of around 90 nm.

For comprehensive product information download the technical data sheet using the link on the right.

Special Features

  • Large operating temperature range
  • Almost universal chemical resistance
  • Approved for use with repeated food contact
  • Dispersion has a high shear stability
  • Low settling tendency

  • Very good non-stick properties
  • High degree of transparency
  • U.S. Food and Drug Administration (FDA) listed: 21CFR 177.1550
  • Approved by the German Federal Ministry of Health (BGA)

Typical Properties

3M™ Dyneon™ Fluoroplastic PFA 6910GZ dispersion is supplied with a pH value of 9 - 11. The viscosity is stable over a wide temperature range which makes the product easy to process. The dispersion can be mixed with fillers or pigments for use in coating formulations. Dilution is possible at any time but should be carried out with desalinated water. Dyneon PFA 6910GZ can improve substrate adhesion and can increase the corrosion protection and gloss of the coating.

Typical Applications

3M™ Dyneon™ Fluoroplastic PFA 6910GZ is mainly used to formulate non-stick coatings for manufacturing cookware and baking tins. The dispersion is mainly used as an additive mixed with PTFE dispersions. It is recommended as an admixture in all layers. As a result of the low particle size, a bimodal particle distribution is created which has a positive effect on corrosion protection due to the increased density. For coating metal surfaces, various techniques such as spray coating, roller coating and silk-screen coating can be employed.
Another area of application is the impregnation of metal surfaces, mainly anodised aluminium. Here the nanoparticles in Dyneon PFA 6910GZ are deposited into the pores of the metal which is improving the protection of the metal surface.

View full description Hide full description

Part Number PFA 6910GZ
Viscosity 12 mPas
Percent Solids 50 %
pH > 9
Melting Point 306 °C
Emulsifier non-ionic
Emulsifier Content 9 %
Mean Particle Size 90 nm
 
 

Help

For tips on searching and how to browse the catalogue go to the help page.