Skip to Primary Navigation Skip to Site Navigation Skip to Main Content All Site Map

You are here: Dyneon Product Catalogue > 3M™ Dyneon™ Dispersion > 3M™ Dyneon™ Fluoroplastic Dispersion > Fluoroplastic FEP 6300GZ > Fluoroplastic FEP 6300GZ

3M™ Dyneon™ Fluoroplastic FEP 6300GZ

3M™ Dyneon™ Fluoroplastic FEP 6300GZ is a transparent, water-based fluorothermoplastic polymer dispersion. The dispersion has a solids content of around 55 %25. The almost spherical, hydrophobic polymer particles have an average size of around 150 nm.

For comprehensive product information download the technical data sheet using the link on the right.

Special Features

  • Large operating temperature range
  • Almost universal chemical resistance
  • Approved for use with repeated food contact
  • Dispersion has a high shear stability
  • Low settling tendency

  • Very good non-stick properties
  • High degree of transparency of the polymer film
  • U.S. Food and Drug Administration (FDA) listed: 21CFR 177.1550
  • Approved by the German Federal Ministry of Health (BGA); recommended by the German Federal Institute for Risk Assessment (BfR)

Typical Properties

3M™ Dyneon™ Fluoroplastic FEP 6300GZ dispersion is supplied with a pH value of 9 - 11. The viscosity is stable over a wide temperature range which makes the product easy to process. The dispersion can be mixed with fillers or pigments for use in coating formulations. Dilution is possible at any time but should be carried out with desalinated water. Dyneon FEP 6300GZ can improve substrate adhesion and can increase the corrosion protection and gloss of the coating.

Typical Applications

3M™ Dyneon™ Fluoroplastic FEP 6300GZ is mainly used to formulate non-stick coatings for manufacturing cookware and baking tins. The dispersion is used pure or as an additive mixed with PTFE dispersions. Furthermore the dispersion is used for corrosion protection in technical applications. Here the product is used without any admixtures. To increase substrate adhesion, the use of suitable primer systems is recommended.
For coating metal surfaces, various techniques such as spray coating, roller coating and silk-screen coating can be employed. The formulations have to be adjusted for each technique.

View full description Hide full description

Part Number FEP 6300GZ
Viscosity 7 mPas
Percent Solids 55 %
pH > 9
Melting Point 255 °C
Emulsifier non-ionic
Emulsifier Content 6.5 %
Mean Particle Size 150 nm


For tips on searching and how to browse the catalogue go to the help page.